GLC-LH-SM-20 1000BASE-LX/LH SFP 1310nm 20km Dual LC/UPC SMF, Compatible with Cisco, Mikrotik, HPE, TP-LINK, HP, Juniper

  • Compatible Brands: Cisco | Juniper | Arista | Brocade | H3C | Dell | Extreme | HW | Intel | IBM | Ciena | NVIDIA/Mellanox (Ethernet) | Fortinet | Calix | Avaya | Alcatel-Lucent | Mikrotik | HPE | TP LINK | HP | D-Link | Ubiquiti | Huawei | Aruba | Finisar | Avago | Nokia | Netgear | Alcate | Lenovo | Generic | Chelsio | Check Point | MRV | F5 Networks | Nortel | Ruckus | QNAP | Palo Alto Networks | Customized
  • Compliance with the IEEE 802.3z Gigabit Ethernet standard for high-speed, reliable data transmission.

  • FDA Class 1 laser safety certified; fully RoHS compliant – safe lead-free operation.

  • Each unit has been tested with leading switch platforms to maximize suitability for years of enhanced stability and performance.

  • Applications with a hot-pluggable SFP MSA compliant design for easy installation and enhanced uptime.

  • Digital diagnostic monitoring (DDM) supported for real-time optical power and temperature monitoring.

  • Power consumption less than 1W, leading to lower heat generation and increased module longevity.

  • Reliable operation and performance in the commercial temperature range of 0–70°C.

  • Each unit will ship with compatibility test reports for the networks.

  • 30-day, free return; 5-year warranty; lifetime after-sales technical support.

Original price was: $26.00.Current price is: $14.00.

Description

Cisco GLC-LH-SM-20 Compatible 1000BASE-LX/LH SFP transceiver module operates on single-mode fiber with a transmission distance of up to 20 kilometers, at a wavelength of 1310nm, through dual LC/UPC connectors. It adheres to the IEEE 802.3z Gigabit Ethernet standards and has a low power consumption level under 1W, allowing for stable power and heat dissipation for extended periods.

This SFP module is 100% compatible with Cisco GLC-LH-SM-20, Juniper Networks SFP-1GE-LX-20, Arista Networks SFP-1G-LX-20, Brocade E1MG-LX-20, H3C SFP-GE-LX-SM1310-20, and Mikrotik S-31DLC20D. Each transceiver has been rigorously tested on that platform to verify the interoperability of the module with the host devices, signal quality and stability, and transmission stability.

The unit has Digital Diagnostic Monitoring (DDM) capabilities for real-time information on optical power, module temperature, and supply voltage. It complies with a commercial temperature range of 0°C to 70°C while nominally maintaining optical power output and nominal receiver sensitivity. It is invoiced as a hot-pluggable SFP MSA compliant form factor, allowing installation and replacement without the need to take the network down.

This unit is configured for ISP uplinks, enterprise core, and data center aggregation networks, and will provide quality link stability for Gigabit connections. It is also Class 1 FDA laser safety and RoHS certified. It will perform for long periods of time, with environmental safety, in 1G fiber communication links up to 20km in length.

Part NumberBYXGD-GLC-LH-SM-20
Vendor NameBYXGD
Form FactorSFP
Max. Data Rate1.25Gbps
Wavelength1310nm
Max. Cable Distance20km
ConnectorDuplex LC
Optical ComponentsFP 1310nm
MediaSMF
DOM SupportYes
TX Power-9.5 ~ -3dBm
Receiver Sensitivity< -23dBm
Commercial Temperature Range0 to 70°C (32 to 158°F)
ProtocolsSFF-8472 MSA Compliant, IEEE 802.3ah-2004, IEEE 802.3z

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “GLC-LH-SM-20 1000BASE-LX/LH SFP 1310nm 20km Dual LC/UPC SMF, Compatible with Cisco, Mikrotik, HPE, TP-LINK, HP, Juniper”

Your email address will not be published. Required fields are marked *