Cisco QSFP-H40G-AOC1M Compatible 1m (3ft) AOC Cable by BYXGD provides 41.25 Gbps of aggregate bandwidth over four full-duplex 10.3125 Gbps lanes through a single 1m multimode fiber using an 850 nm VCSEL and PIN receiver. Hot-pluggable QSFP+ MSA (SFF-8436/SFF-8643 Rev 4.1), IEEE 802.3ba compliant, and supports a maximum of 1.5 W power consumption. The operating temperature range is 0-70 degrees C, fully DDM enabled, and has a 30 mm minimum bend radius for rack routing.
This cable has been tested and optically inspected in Cisco, Arista, Juniper, Dell, HPE, Huawei switches, covering over 200 manufacturers. This ensures error-free support for all Fiber Channel protocols (InfiniBand FDR/QDR/DDR/SDR/40GBASE-SR4), as well as 4G/8G/10G Fiber Channel, PCIe, and SAS/SATA storage. The design incorporates Class 1 FDA laser safety, RoHS compliance, and low EMI characteristics, offering a cost-effective alternative to discrete transceivers for use in short-link applications.
Specifications
| Brand | BYXGD |
| Connector Type | QSFP+ to QSFP+ |
| Form Factor | QSFP+ Active Optical Cable (AOC) |
| Data Rate | Up to 42 Gbps (40 Gbps max) |
| Wavelength | 850 nm |
| Cable Type | Aqua OM3 Multi-mode Fiber (MMF) |
| Cable Length | 1m to 100m (3.28 ft to 328 ft) |
| Minimum Bend Radius | 30 mm |
| Jacket Material | OFNP / LSZH |
| Temperature Range | 0°C to 70°C (32°F to 158°F) |
| Power Consumption | < 2.6 W (< 1.3 W per side) |
| Digital Diagnostics | Yes (DDM/DOM) |
| Protocols | 40GBASE Ethernet, InfiniBand QDR, 4G/8G/10G Fibre Channel, SATA, SAS3, PCIe3, 10G/40Gigabit Ethernet or Fibre Channel |
| Compliance | IEEE 802.3, SFF-8431, SFF-8436, SFF-8438i, RoHS |
| Data Integrity | 1e-12 BER |
| Flame Rating | Low Smoke Zero Halogen (LSZH) |
| Hot Swappable | Yes |
| Warranty | 1 Year |
Reviews
Clear filtersThere are no reviews yet.